DBA992AX

Feature Description	Advantage	Benefit
Kangaroo Paw – 144 diamond and tear drop pillar ventilation system	Increased surface area resulting in greater heat dissipation	Minimises brake fade and increases braking effectiveness
	Increased surface area resulting in greater heat dissipation	Prolongs service life for both pads and rotors. Reduces mechanical damage and associated costs
XG150 High Carbon Alloyed Iron	An increase in thermal capacity property allows the rotor to handle constant extremes of heat over extended periods of time	Minimises warping and cracking and prolongs the service life of the rotor
Paint protection on non-friction areas	Reduces corrosion	Stops any unsightly rust formation
	Enhances appearance	Adds value to the product
CBN (Cubic Boron Nitride) machine turned	Reduced DTV (Disc thickness variation) and parallelism	Less occurrence of brake shudder or brake pedal

DBA’s X Gold provides all the benefits of Street Series, with a premium non-directional cross drilled and slotted design, plus an attractive gold finish on the rotor hub.

The introduction of our unique cross drilled and slotted design increases the number of exit points, allowing more brake pad friction dust and gases to escape through both the cross drilled holes and slots, resulting in better braking performance.

While providing a similar performance benefit to the T2 slot, the X Gold is a popular alternative for open wheel and show cars. We recommend the T2 slot design for more intensive braking applications.

DBA’s Street Series rotors feature:
• Kangaroo Paw ventilation
• Direct replacement suitability
• Moisture proof corrosion protection packaging

DBA recommends the street series for daily drivers, light commercial and street SUV applications.

*Not available on all part numbers. Please confirm with your distributor.

DBA utilises a CBN (Cubic Boron Nitride) machine turned finish on the friction surface for improved DTV (Disc Thickness Variation) and parallelism.

This provides a more dimensionally precise and stable surface finish when compared to ‘ground’ finished rotors.

DBA gives you 100% confidence in fitment every time, not a cheap inferior alternative!

Diameter [mm]: 304,8\nDisc Vent: Vented\nNumber of Holes: 5\nInner Diameter [mm]: 71\nMinimum Thickness [mm]: 24,5\nThickness [mm]: 26\nHeight [mm]: 48.5\nStage: Stage 1\nTech Bulletins: Bedding in Brakes\nTech Bulletins: How to clean a Disc Rotor before fitting\nTech Bulletins: Motorsport - Important Info